Silicon Labs /SiM3_NRND /SIM3L166_C /EPCA_0 /MODE_1

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as MODE_1

DIFGEN=DISABLED, COSEL=TOGGLE_OUTPUT, CMD=EDGE_PWM

Description

Channel Capture/Compare Mode

Fields

COSEL	Channel Output Function Select. 0 (TOGGLE_OUTPUT): Toggle the channel output at the next capture/compare, overflow, or intermediate event. 1 (SET_OUTPUT): Set the channel output at the next capture/compare, overflow, or intermediate event. 2 (CLEAR_OUTPUT): Clear the output at the next capture/compare, overflow, or intermediate event. 3 (NO_CHANGE): Capture/Compare, overflow, or intermediate events do not control the output state.
PWMMD	PWM N-Bit Mode.
DIFGEN	Differential Signal Generator Enable. 0 (DISABLED): Disable the differential signal generator. The channel will output a single non-differential output. 1 (ENABLED): Enable the differential signal generator. The channel will output two differential outputs: X Phase (XPH) and Y Phase (YPH).
CMD	Channel Operating Mode. 0 (EDGE_PWM): Configure the channel for edge-aligned PWM mode. 1 (CENTER_ALIGNED_PWM): Configure the channel for center-aligned PWM mode. 2 (HF_SQUARE_WAVE): Configure the channel for high-frequency/square-wave mode. 3 (TIMER_CAPTURE): Configure the channel for timer/capture mode. 4 (N_BIT_PWM): Configure the channel for n-bit edge-aligned PWM mode.

Links

()